How to Maintain Your Jet Ski
Purchasing a jet ski is no small investment, and you may end up blowing out your planned budget in the long run if you don’t have the right mindset on preventative care. Maintaining your jet ski is a responsibility that’s ongoing, and you will have to regularly check certain parts of it if you want to avoid paying a hefty jet ski service. Take a look at five important tips on how to maintain your jet ski to keep it running at its best.
Read Owner’s Manual
For people who own a jet ski for the first time, it is very important to read the manual as often and as thoroughly as you can. This is because modern manuals provide details on each part of your PWC, which will let you understand how all of its components work. It is best to avoid any DIY repairs on your investment if you’re unsure how to do it as this can give you more headaches than good.
Flush Engine
Whether you will be riding on salt or fresh water, it is important to flush the engine of your jet ski after each ride. The reason for this is because it will help get rid of any sand, salt, weeds, shells and algae which can cause problems to the jet unit and engine.
The modern jet skis you can buy today have their own hose connector installed which is used for interior cleaning. All you have to do is to attach this hose to the connector before you start the engine. Once the engine is running, turn on the hose and keep it that way for at least two minutes. Let your PWC run for a few more seconds after you have turned off the hose and pull on the throttle a few times to drain it of excess water from the exhaust. This is an ideal jet ski service you can do for your craft. This should be carried out after every ride as this is good maintenance and will make your watercraft last longer.
Wash It Down After a Ride
Although the jet skis that we have today are modern enough to last a long time, saltwater can still damage your ski and fibreglass which can lead to issues later on. That is why it is important to wash down your ride after using it on saltwater. You can do this by applying warm soapy water together with a sponge and try to remove any salt residue on the PWC. Rinse the soap off with low water pressure from a hose to finish. If you do find yourself with a damaged hull or fiberglass Friday’s can restore your ski. Using a corrosion control product is the best way to prevent damage and effects of salt water on your engine, trailer, vehicle, rods & reels.
Check for Damage and Regular Inspections
Jet skis are sturdy are capable of absorbing small damages here and there, but mechanical wear will still show over time similar to how cars work. Fissures or cracks in the fibreglass will have to be looked at by an expert as soon as you can as any damage to the hull can cause significant damage to interior components. Call Friday’s for professional fiberglass repairs.
Regular Jet Ski Services
The checking of problems and replacement of any parts should only be done by technicians who are qualified to do the job. The reason for this is because they have the expertise to perform installations, maintenance and replacements when needed. Friday’s technicians are all Sea-Doo trained and qualified repairers, ensuring only the highest quality of workmanship on your ski.
Ask us about our Jet Ski service deals on Friday’s to learn more!