Why Winterising Your Jet Ski Matters
Even in Western Australia, where winters are milder, leaving your jet ski unused without preparation can lead to:
- Engine corrosion
- Battery failure
- Fuel degradation
- Mould and moisture build-up
Taking the time to winterise your PWC properly helps extend its lifespan and prevents costly repairs.
Step-by-Step: How to Winterise Your Jet Ski
1. Flush the Engine Thoroughly
After your last ride, especially in saltwater, flush the engine with fresh water to remove salt, sand, and debris.
Pro tip: Use a quality flush product like Salty Captain's Engine Flush to help break down salt and protect internal components.
2. Add Fuel Stabiliser
Fuel can degrade over time and cause engine issues. Adding a stabiliser:
- Prevents fuel breakdown
- Protects the fuel system
- Makes startup easier next season
Run the engine briefly after adding XPS Fuel Stabiliser so it circulates properly.
3. Protect the Engine with Storage Oil
This is one of the most important steps - especially for first-timers.
Using a product like Sea-Doo XPS Storage Oil Spray, you can:
- Coat internal engine components
- Prevent rust and corrosion
- Protect against moisture during storage
4. Drain All Water from the Hull
Water left sitting in your jet ski can lead to mould, odours, and corrosion.
Tools like the Suckomatic Pro make this easy by removing water from:
- Footwells
- Engine bay
- Bilge areas
5. Remove and Charge the Battery
Take the battery out and store it in a dry place. Keep it charged throughout winter to prevent it from dying.
6. Clean and Dry Your Jet Ski
Give your jet ski a full clean:
- Wash off salt and grime
- Dry thoroughly
- Apply protective sprays where needed
This helps prevent long-term damage and keeps your ski looking new.
7. Cover Your Jet Ski Properly
Invest in a quality Sea-Doo cover to protect against:
- Dust and debris
- UV damage
- Moisture
Avoid cheap covers that trap moisture - breathability is key.
Common Mistakes to Avoid
First-time winterisers often:
- Skip fuel stabiliser
- Forget to remove water from the hull
- Leave the battery connected
- Store the ski without a proper cover
Avoiding these mistakes can save you time and money later.
Should You DIY or Book a Service?
If you’re confident, you can handle basic winterising yourself. But if you’re unsure - or want peace of mind - it’s always worth getting a professional involved.
At Friday’s Jet Skis, we offer:
- Pre-storage servicing
- Full winterisation packages
- Genuine Sea-Doo parts and maintenance products
- Expert advice tailored to your model
Winterise Your Jet Ski with Confidence at Friday’s
If you’re winterising your jet ski for the first time, the easiest way to get it right is to speak with the experts.
👉 Visit Friday’s Jet Skis in Port Kennedy
👉 Pick up the right products (like XPS Storage Oil and covers)
👉 Or book a professional winterisation service
Taking the time now means a hassle-free start when summer rolls back around.




